I'm in the process of completing a slam to open my pool. Water is starting to get clear enough for me to see the bottom. My swg console was telling me that I had a salt level of 2500 ppm and to add 25 lbs. To bring the level back up to 3000 ppm which I did. I would think that by now in the slam process that the swg should be producing enough FC to maintain the Fc level, especially with it running 24/7. The unit has also been turned up to 100% on the highest level. Last season (the first season that I have used the swg) the unit was only set to 60% on medium level to maintain FC. I did another salt test using strips and it showed the salt level at only 360 ppm which would explain the lack of output but why would the test and the swg console be putting out such drastically different levels. Salt does not dissipate, so why would I have such a low level as shown by the strips.
FC. 16
TA. 70
PH. 7.5
CH. 40
CYA. 40
Salt. ?????
FC. 16
TA. 70
PH. 7.5
CH. 40
CYA. 40
Salt. ?????