Just installed 4 new cartridges in my Hayward C3025 and after putting everything back together, I noticed two things:
1) The pump strainer basket is not completely filled with water. It's probably a good 2-3 inches from the top and the splashes aren't even touching the top of the lid
2) The pressure is reading between 2 and 3 psi.
The return lines have a pretty good flow of water coming out (more than when the old cartridges were in there).
Is this normal or is something else going on? Thank you.
1) The pump strainer basket is not completely filled with water. It's probably a good 2-3 inches from the top and the splashes aren't even touching the top of the lid
2) The pressure is reading between 2 and 3 psi.
The return lines have a pretty good flow of water coming out (more than when the old cartridges were in there).
Is this normal or is something else going on? Thank you.