Just got my TF-100 and gave my water a complete check. I just had a new liner installed, so I am starting from a complete fill from my well. My pool is a 23000 gallon 18x38 vinyl lined IG.
My current values are:
FC: 3
CC: 0.5
pH: 7.5
TA: 260
CH: 40
CYA: 35
I know my TA is on the high side, due to my mis-assumption on the pool size and over-calculating the amount of baking soda I needed. However, from the reading I've done here, that in itself is not a problem due to my pH being very stable and CH low enough that I'm not having any clouding issues.
The water itself is crystal clear.
Please give your opinions on whether I should lower the TA or just let the acid rain lower it.
thanks,
Jim
My current values are:
FC: 3
CC: 0.5
pH: 7.5
TA: 260
CH: 40
CYA: 35
I know my TA is on the high side, due to my mis-assumption on the pool size and over-calculating the amount of baking soda I needed. However, from the reading I've done here, that in itself is not a problem due to my pH being very stable and CH low enough that I'm not having any clouding issues.
The water itself is crystal clear.
Please give your opinions on whether I should lower the TA or just let the acid rain lower it.
thanks,
Jim