Hey all. So I am getting my above-ground spa in order using the bromine system and I am a little concerned about a few things. So far, I have emptied, cleaned and refilled tub. I balanced the spa. pH 7.4, TA 40, CH 100. I then threw in a packet of sodium bromide and just over 1/2 cup of 8.75% concentrated bleach. I tested with the FAS-DPD test a few hours after adding bleach and 24 hours later and it came out to FC 11 both times. Assuming we multiply that by 2.25 that means I am at 24.75 for bromine? According to the bromine sticky, I shouldn't enter the spa until that number gets below 10. Based on what I have seen so far that seems like it wont be for some time. Is that normal? Also, when I do the FAS-DPD test, when the water goes from pink to clear it has a bit of a yellowish haze. That seemed a bit odd to me as well. Any thoughts? Thanks.