I have an Inteliflo VF that I just did the first Backwash with today.
The priming everytime you want to do a backwash is driving me crazy.
Here's how I would normally backwash my DE filter.
Put valve in backwash position
Run pump, watch output to see if it is clearing, run a few minutes...
Put Valve in Rinse, run a minute to bump the DE
Put valve in backwash position
Run pump, watch output to see if it is clearing, run a few minutes...
Put Valve in Rinse, run a minute to bump the DE
Repeat till I'm happy with the output water being clear.
This drives you crazy and wastes a ton of water with evertime you start and stop the pump it goes thru an un-necessary priming cycle.
Any way to go straight to high speed without the prime?
The priming everytime you want to do a backwash is driving me crazy.
Here's how I would normally backwash my DE filter.
Put valve in backwash position
Run pump, watch output to see if it is clearing, run a few minutes...
Put Valve in Rinse, run a minute to bump the DE
Put valve in backwash position
Run pump, watch output to see if it is clearing, run a few minutes...
Put Valve in Rinse, run a minute to bump the DE
Repeat till I'm happy with the output water being clear.
This drives you crazy and wastes a ton of water with evertime you start and stop the pump it goes thru an un-necessary priming cycle.
Any way to go straight to high speed without the prime?