I installed a new T-15 on Thursday. During late September I had added salt in response to a low salt reading of 1,700 on my Remote. The salt display has risen to 5,800 in the 48 hours since installation. Last night, I turned the Aqua Rite switch to "off." The Aqua Rite box display shows:
Power - green
Generating - green
Remote control - green
Inspect cell - flashing yellow
Is there anything else I should do to turn off the SWG - either at my remote pad or by unplugging the cell from the box?
I assume that I will have to drain some water and refill to get the salt level down. Should I do that in stages so that the water level does not get too low? Does anyone know about how long I can drain for and still be safe?
I've also seen some other threads here where some experts have said it's ok to operate the SWG at higher than normal levels. But I assume 5,800 is way too high?
Thanks!
Power - green
Generating - green
Remote control - green
Inspect cell - flashing yellow
Is there anything else I should do to turn off the SWG - either at my remote pad or by unplugging the cell from the box?
I assume that I will have to drain some water and refill to get the salt level down. Should I do that in stages so that the water level does not get too low? Does anyone know about how long I can drain for and still be safe?
I've also seen some other threads here where some experts have said it's ok to operate the SWG at higher than normal levels. But I assume 5,800 is way too high?
Thanks!