I just installed a brand new Polaris 360. However it is not working properly. Couple of things:
1. The backup valve continuously sprays water
2. The Polaris runs really slow (didn't check the RPM, but this is definitely less than 28)
3. It does not pick up leaves
3. After running for a while it circles around within a small area
I did all sort of trouble shooting (i.e. putting a cap on other water outlets, checking filter pressure, putting the little thing at 11 O'clock position etc.). The only thing that I concerns me is the filter pressure starts ~ 22 psi (after backwash) and this becomes ~ 27 after an hour or so. Does it have anything with the Polaris 360 issue?
Please note that this a brand new Polaris 360 (fresh out of box).
Hope somebody can help! Thanks in advance.
1. The backup valve continuously sprays water
2. The Polaris runs really slow (didn't check the RPM, but this is definitely less than 28)
3. It does not pick up leaves
3. After running for a while it circles around within a small area
I did all sort of trouble shooting (i.e. putting a cap on other water outlets, checking filter pressure, putting the little thing at 11 O'clock position etc.). The only thing that I concerns me is the filter pressure starts ~ 22 psi (after backwash) and this becomes ~ 27 after an hour or so. Does it have anything with the Polaris 360 issue?
Please note that this a brand new Polaris 360 (fresh out of box).
Hope somebody can help! Thanks in advance.