Hi All,
I haven't had much trouble with my pool but I test it on a daily basis and brush daily. The water is a bit cloudy, but we've been using it quite lot lately and I just wanted to get your opinions on my numbers. Also our eyes are burning just a bit, when we get out, but we've been in the water for about 6-7 hours so that may be normal so here are the specs.
Pool Temp 80 Degrees
FC-6.5
CC-0
P/H 7.6
T/A 110
CYA 50
I have a cartridge filter that has been cleaned on a monthly basis.
I just added MA, 22oz yesterday and 22oz today trying to get my P/H down which I know it is a little high.
I just added 96oz of Bleach yesterday because my FC went down to 3 and I needed to bring it up.
Also one last question, on testing my TA do stop adding the agent once the solution turns cloudy but clear, in other words no more green or when it turns real clear? Here is the scenario, I add the re-agent one drop at a time, when it hits 10 drops the solution turns clear, but if I add one more drop it turns real clear. So right now there is a discrepency as to whether my T/A is 100 or 110.
Some other info- I am on the BBB method, although I have the Tri-Chlor but switched over after reading all the info on this site. I run my fountain and spa spillover daily for aeration and between me and the kidsmaking sure more pool water is out of the pool instaed of in it is how I control my CYA LOL!
Thanks for the help and advice!
I haven't had much trouble with my pool but I test it on a daily basis and brush daily. The water is a bit cloudy, but we've been using it quite lot lately and I just wanted to get your opinions on my numbers. Also our eyes are burning just a bit, when we get out, but we've been in the water for about 6-7 hours so that may be normal so here are the specs.
Pool Temp 80 Degrees
FC-6.5
CC-0
P/H 7.6
T/A 110
CYA 50
I have a cartridge filter that has been cleaned on a monthly basis.
I just added MA, 22oz yesterday and 22oz today trying to get my P/H down which I know it is a little high.
I just added 96oz of Bleach yesterday because my FC went down to 3 and I needed to bring it up.
Also one last question, on testing my TA do stop adding the agent once the solution turns cloudy but clear, in other words no more green or when it turns real clear? Here is the scenario, I add the re-agent one drop at a time, when it hits 10 drops the solution turns clear, but if I add one more drop it turns real clear. So right now there is a discrepency as to whether my T/A is 100 or 110.
Some other info- I am on the BBB method, although I have the Tri-Chlor but switched over after reading all the info on this site. I run my fountain and spa spillover daily for aeration and between me and the kidsmaking sure more pool water is out of the pool instaed of in it is how I control my CYA LOL!
Thanks for the help and advice!