i have a 2speed pump, but havent been able to get the toggle switch toggle.
The toggle switch white,yellow is pre-connected by manf. to connector 1, 2 (yellow line is on 2), connector 3 has no connection. The BLACK wire is caped off.
-i am using standard on/off pool switch box, 2 hot wires, 1 green-gnd. comes into the pump.
-i connected the two hotwires to withe and yellow lines, it pumps at slow speed.
if i move the yellow wire to connector 3, and bring one of hot wires to connector 3, and connect the BLACK line to connector 2, it pumps at highspeed, but wont toggle to low speed.
any one knows how to fix the issue?
The toggle switch white,yellow is pre-connected by manf. to connector 1, 2 (yellow line is on 2), connector 3 has no connection. The BLACK wire is caped off.
-i am using standard on/off pool switch box, 2 hot wires, 1 green-gnd. comes into the pump.
-i connected the two hotwires to withe and yellow lines, it pumps at slow speed.
if i move the yellow wire to connector 3, and bring one of hot wires to connector 3, and connect the BLACK line to connector 2, it pumps at highspeed, but wont toggle to low speed.
any one knows how to fix the issue?