Thanks to JimBoAZ and the great deal offered over at USWaterSystems.com, I am finally considering going with a stenner pump system for injecting my daily chlorine dosage. One of the options is a tube size of 1/4" or 3/8". What is the consensus of the forum? I am assuming 3/8" however, I can plumb it either way. Also, since I use less than a gallon per day, which model is preferred, the 45MPHP2 or the 45MHP2?
I will also be adding in a gray tank (7.5 or 15 gallon, your thoughts?) and rain roof with this purchase as well.
Also, preferred method of setting it up, (timer, automation, etc.)? My pool pump runs 24 hours a day. I ran extra wires in the power feed conduit so I can split off other receptacles if necessary.
Thanks in advance.
Marvin
I will also be adding in a gray tank (7.5 or 15 gallon, your thoughts?) and rain roof with this purchase as well.
Also, preferred method of setting it up, (timer, automation, etc.)? My pool pump runs 24 hours a day. I ran extra wires in the power feed conduit so I can split off other receptacles if necessary.
Thanks in advance.
Marvin