So many messages about problems... but I wanted to report some success. Two weeks ago had an EasyTouch8 installed to control my pool/spa combination. Had a pro do that it is working as advertised. Made some schedules and all is well. Bit of a learning curve, but nothing I can't handle.
This weekend I installed a ScreenLogic2 interface. I did this install myself and it was fairly strait forward. It is connected directly to my U-Verse router in my garage. After the install and initial testing, I also updated the firmware in the device from the Pentair web site and got the latest PC software and installed the iPhone app. Smooth as butter!! Very neat to control my equipment from my phone and check on its status.
I know these automation systems are not necessary but they do have a great coolness factor. If you are thinking about such an upgrade, it is only money. :-D I am really pleased and look forward to a good summer in the pool and spa.
This weekend I installed a ScreenLogic2 interface. I did this install myself and it was fairly strait forward. It is connected directly to my U-Verse router in my garage. After the install and initial testing, I also updated the firmware in the device from the Pentair web site and got the latest PC software and installed the iPhone app. Smooth as butter!! Very neat to control my equipment from my phone and check on its status.
I know these automation systems are not necessary but they do have a great coolness factor. If you are thinking about such an upgrade, it is only money. :-D I am really pleased and look forward to a good summer in the pool and spa.