- May 24, 2013
- 7
Went through all the trials and tribulations of leveling the ground for a 14' by 48'' intex including an assemble/dissemble fill/drain to correct a 6'' lean!
The good news is I got it level and have been having fun. I live in Bryan Texas and I am told the water is hard and has metals in it. I swam the first day with no chemicals and then added (2) 3'' pucks to a floater.
I took my levels today and the PH is way high 8.4+, Alkalinity is well over 1800 (I actually couldn't get the solution to turn red after 18 drops of titrant.)
Chlorine is not registering.
At this point all I have done is added PH Minus (8 ozs) as the pool is about 4600 gallons. Any suggestions to right this ship?
I am open to BBB but intend to work the 4 steps with hth products.
The good news is I got it level and have been having fun. I live in Bryan Texas and I am told the water is hard and has metals in it. I swam the first day with no chemicals and then added (2) 3'' pucks to a floater.
I took my levels today and the PH is way high 8.4+, Alkalinity is well over 1800 (I actually couldn't get the solution to turn red after 18 drops of titrant.)
Chlorine is not registering.
At this point all I have done is added PH Minus (8 ozs) as the pool is about 4600 gallons. Any suggestions to right this ship?
I am open to BBB but intend to work the 4 steps with hth products.