Ok, so I have a "shallow" end of the pool that has 3 spa jets on each side of the seats
Like this, so six in total.[attachment=0:25mcqdfl]jets.jpg[/attachment:25mcqdfl]
There is also a "air blower" going to the jets and they have spa style rotating returns.
The plan is to allow for all 6 to be on and then shut off one side for more action, etc.
I have a single two speed pump that on HIGH puts out a bit more than 100 GPM. I have all 2" rigid PVC with relatively short runs.
The filter has a max flow of 93 GPM (not sure if this is before or after sand, it is a Waterco S750 Fiberglass.
So is it really worth to install yet another manifold to divert the flow pass the filter when using the jets ? Seems like I am getting very little gain...other than I am not sure if that flow in filter is input or output?
Any comments or thoughts or questions, let me have it!
Like this, so six in total.[attachment=0:25mcqdfl]jets.jpg[/attachment:25mcqdfl]
There is also a "air blower" going to the jets and they have spa style rotating returns.
The plan is to allow for all 6 to be on and then shut off one side for more action, etc.
I have a single two speed pump that on HIGH puts out a bit more than 100 GPM. I have all 2" rigid PVC with relatively short runs.
The filter has a max flow of 93 GPM (not sure if this is before or after sand, it is a Waterco S750 Fiberglass.
So is it really worth to install yet another manifold to divert the flow pass the filter when using the jets ? Seems like I am getting very little gain...other than I am not sure if that flow in filter is input or output?
Any comments or thoughts or questions, let me have it!