I have an Intellichlor IC40 that is flashing the green salt light and the cell light. The salt has been checked and the level is not too high. I cleaned the cell and then the light would not come on at all, but the salt light continued to flash. I shut the system down by turning off the power at the breaker switch and when I turned it back on the cell light came back on and did not flash. I checked the cell life and we are at 60%. I went ahead and let out some water and added fresh to reduce some of the salt but the green salt light continues to flash. After several hours of running, the cell light will flash again too. The only way to get it to run a solid green is to reboot the system by shutting it all the way down.
Any suggestions on what the problem could be?
Any suggestions on what the problem could be?