i refilled the spa about a month ago and used eco spray filter cleaner. i rinsed well and filled the spa and it had a light green tint to it and i had some foam right off the bat. now i had waxed the spa and cleaned everything so i had no idea what it was making the green tint color and foam. but i just soaked my 5 filters in eco soak over night and i rinsed them and installed them. water turned a milky blue with some foam with the jets on. it takes about 20 seconds just to barely see the bottom of the spa. about a minute later it is clear but has a light blue tint now.
eco spray is green and eco soak is blue.
eco soak does say to let the filters air dry witch i didn't do. i had rinsed them really well and rinse them again before i installed each one.
i used 3 cups of spa soak in 15 gallons of water for 5 filters. i wouldn't think there was much residue left on the filters but it did turn the water from a green tint to a blue tint. it doesn't seem like the stuff breaks down in water since i still had the foam and green tint from the eco spray a month after use.
so i'm debating if i should drain and refill or just use the spa for another two months?
eco spray is green and eco soak is blue.
eco soak does say to let the filters air dry witch i didn't do. i had rinsed them really well and rinse them again before i installed each one.
i used 3 cups of spa soak in 15 gallons of water for 5 filters. i wouldn't think there was much residue left on the filters but it did turn the water from a green tint to a blue tint. it doesn't seem like the stuff breaks down in water since i still had the foam and green tint from the eco spray a month after use.
so i'm debating if i should drain and refill or just use the spa for another two months?