G
Guest
New to the forums and recently decided to ditch the pool guy. As far as my test kit the wife bought a HTHG one from Walmart to get started becasue it was inexpensive. I have a SWG and added salt yesterday to bring it up and retested today. Here are my latest results.
FC=3.0
Ph=7.5
TA=120ppm
CH=Well not sure since the test water didn't even turn red......
CYA-Looks to be at 100 or just above that, the highest the test kit went was 100 and it was a couple of mm less than the line.
Salt level as of today is 2400 (gonna add 1 more bag today) and water temp is 65.
Water doesn't look too bad but I'm worried about the high CYA and the hardness.
Here are a couple of pictures I took just now:
FC=3.0
Ph=7.5
TA=120ppm
CH=Well not sure since the test water didn't even turn red......
CYA-Looks to be at 100 or just above that, the highest the test kit went was 100 and it was a couple of mm less than the line.
Salt level as of today is 2400 (gonna add 1 more bag today) and water temp is 65.
Water doesn't look too bad but I'm worried about the high CYA and the hardness.
Here are a couple of pictures I took just now: