I have a new pool finished in August. It is a SW pool and has been perfect until now. Water has been getting cloudy for the last week and now I can barely see the main drains. It doesn't look green, just very cloudy. It has been raining off and on lately and the water temp varies from 42-46 deg.
Water info:
North Alabama
43 deg water temp
I run the filter about once a week in now that it's cold, but ran it for 36 hours over Christmas.
TF-100 bought in July.
Chemicals were at 50* in shop.
FC = 6
CC = 0
PH = 7.8
TA = 50
CH = 170
CYA = ~47 (45-50)
What should I do since the CC's are 0?? Is it just dirt being suspended from the rain?
Water info:
North Alabama
43 deg water temp
I run the filter about once a week in now that it's cold, but ran it for 36 hours over Christmas.
TF-100 bought in July.
Chemicals were at 50* in shop.
FC = 6
CC = 0
PH = 7.8
TA = 50
CH = 170
CYA = ~47 (45-50)
What should I do since the CC's are 0?? Is it just dirt being suspended from the rain?