- Jul 7, 2010
- 34
- Pool Size
- 22000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I am having a problem with the wireless controller of my Easytouch 8 system giving a NO COMM error. I have tried resetting both the outdoor panel and controller, and have also tried syncing both again by sending the wireless address, but my controller displays "Address Lock" and "searching for signal" but never syncs. This all began after having some power outages two nights ago. I also have the protocol adapter connected to the same terminal screws on the comport, and everything worked fine until we lost power. I have not pulled the panel yet to see if/what lights I have on the transceiver board, nor have I cleared the EEPROM yet. Is it normal for the remote to display address lock as soon as you go to the wireless address menu?