[Split by moderator - Please ask questions in your own thread. I also removed your personal information. - jblizzle]
Scott - You seem to be the expert so here is my question. I NEED HELP PLEEEEASSSEE and thank you
I have a Spa and Pool. I replaced one of the Jandy valve actuators. The one that controls the Main Drain between the Pool and the Spa. The pipes are set up so that "9 o'clock" is the Spa Main Drain, "6 o'clock" is the Pool Main Drain, and Noon is the outflow from the main drains. The actuator rotates 180 degrees from a position of open for both spa drain and main drain and out flow, (i.e. positioned at "3 o'clock") to 180 degrees to closing the Spa Main Drain.
The jandy valve actuator on the Return is positioned so that it rotates 180 degrees. Either returning to the Spa or returning to the Pool.
My question is, how should the actuators be set so that the spa works. The system works fine when the pool is running, but when the spa is turned on, the spa drains. I think that the issue is that the new actuator on the Main drains is rotating 180 degrees and not 90 degrees. If this is the solution, how do I adjust this. If this is not the issue, please advise
thanks
Jack
Scott - You seem to be the expert so here is my question. I NEED HELP PLEEEEASSSEE and thank you
I have a Spa and Pool. I replaced one of the Jandy valve actuators. The one that controls the Main Drain between the Pool and the Spa. The pipes are set up so that "9 o'clock" is the Spa Main Drain, "6 o'clock" is the Pool Main Drain, and Noon is the outflow from the main drains. The actuator rotates 180 degrees from a position of open for both spa drain and main drain and out flow, (i.e. positioned at "3 o'clock") to 180 degrees to closing the Spa Main Drain.
The jandy valve actuator on the Return is positioned so that it rotates 180 degrees. Either returning to the Spa or returning to the Pool.
My question is, how should the actuators be set so that the spa works. The system works fine when the pool is running, but when the spa is turned on, the spa drains. I think that the issue is that the new actuator on the Main drains is rotating 180 degrees and not 90 degrees. If this is the solution, how do I adjust this. If this is not the issue, please advise
thanks
Jack