I installed the liquidator today, but I do not have enought flow to raise the ball from zero. I have the liquidator about 5ft from the pump & filter. There is flow going thru the tube but has very little pressure. I don't have any leaks at my fittings.
I don't know what else to check. I checked to make sure the arrows are pointing away from the liquidator on the "out" side going to the pump & the check valve on the "in" side is pointing to the liquidator.
Thanx,
Gdog
I don't know what else to check. I checked to make sure the arrows are pointing away from the liquidator on the "out" side going to the pump & the check valve on the "in" side is pointing to the liquidator.
Thanx,
Gdog