Hello,
I have recently installed a new Suntouch controller with Intelliflo VS pump and my original Aquarite SWG ( Cell T-15 )
After many hours of trying to understand the Suntouch manual , everything is working according to plan except one thing, controlling the Aquarite SWG remotely.
The Aquarite unit is rev 1.4 and has the Cell T-15. The unit working perfectly in manual mode generating chlorine. I tripled checked the com port wiring according to the manual.
Aquarite ----> Suntouch
Green Blk (gnd)
Yellow Grn (-DT)
Black Yel(+DT)
Red Red ( +15)
The remote control led never turns on. I have tried many combinations of settings since the manuals do not explain this scenario.
Does anyone have this combination working and what are your settings for the SWG and Suntouch?
Appreciate any assistance.
Rick
I have recently installed a new Suntouch controller with Intelliflo VS pump and my original Aquarite SWG ( Cell T-15 )
After many hours of trying to understand the Suntouch manual , everything is working according to plan except one thing, controlling the Aquarite SWG remotely.
The Aquarite unit is rev 1.4 and has the Cell T-15. The unit working perfectly in manual mode generating chlorine. I tripled checked the com port wiring according to the manual.
Aquarite ----> Suntouch
Green Blk (gnd)
Yellow Grn (-DT)
Black Yel(+DT)
Red Red ( +15)
The remote control led never turns on. I have tried many combinations of settings since the manuals do not explain this scenario.
Does anyone have this combination working and what are your settings for the SWG and Suntouch?
Appreciate any assistance.
Rick