Hi, I'm sure I sound like a broken record but I have been reading for hours and am not sure what is going on with my pool. I started with a fresh fill this year after I put my new liner in around may. I have been on the BBB method for the first time and started when I filled the pool. I have been bringing my CYA up and working to get my TA down from over 250. Before I left for vacation I was at FC=2 PH=7.2 TA=150 CYA=25. While I was gone my mom was adding 12.5% Bleach and MA in the dosses that I told her to after she tested it every other day. She was adding a gallon off 12.5 bleach every other day because my pool is in full sun all day and the temps were over 105F every day I was gone the pool water was around 95 that whole week. The day I got home the FC went to 0 so I new something was up and gave it 2 Gal of 12.5% but I guess it was too late and it went green on me. I have been following the steps to cure it, but now I'm stumped. My pool water is greenish brown tint and has been for 2 days. Yesterday there was a lot of algae laying on the bottom so I vacced to waste then today there was just a little bit so I vacced to the filter but when I backwash the 250lb sand filter the sight glass stayed mostly clear. Here are my tests FC=12 CC=0 PH=7.8 CH=220 TA=110 CYA=25 Temp=92. I'm not sure why my glass stays pretty clear while back washing, why my CC is 0 and why my pool isn't getting clearer. Please help.