So my Pentair Intellichlor is obviously not working as the salt levels are all over the place and now the service light is on and I am still getting a check flow / pcb error on my intellitouch controller. I have cleaned the cell and the filter. The cell itself says the flow is good.....AHHH have call into PB to come out an check the issu, but in the meantime my pool isn't getting any chlorine as the cell stops producing when in need of service.
So, is it safe to disconnect the SWG and add some chlorine tablets or liquid bleach....?????I am about to leave on a week long vacation and I can't leave knowing I will probably come back to algea if I don't do something.....
I thought I have read not to add tablets or bleach if using SWG???? Please advise oh wise TFP members!
So, is it safe to disconnect the SWG and add some chlorine tablets or liquid bleach....?????I am about to leave on a week long vacation and I can't leave knowing I will probably come back to algea if I don't do something.....
I thought I have read not to add tablets or bleach if using SWG???? Please advise oh wise TFP members!