OK, I posted a few days ago about the milky water coming out of my returns at a commercial pool of mine. Called Hayward and they said it was metals in the water. Nuked it with Metal Klear from Sea Klear and that fixed the milky problem BUT I have 0 chlorine in pool
FC - 0.0
TC - 0.0
pH - 7.5
TA - 80
CH - 240
CYA - 80
Phosphates - 200 Added 1/2 quart of Phosphate remover tonight.
I know the manual says it's best to start with a chlorine level. But I should have some ch in the water.
I circumvented the flow sensor and placed the cell in a 5 gallon bucket of water & in less then a minute had a 15 ppm level in the bucket, so I know the cell is working. I have it set at 100% now and will check it in the AM but I'm stumped.
Thanks for any input.
FC - 0.0
TC - 0.0
pH - 7.5
TA - 80
CH - 240
CYA - 80
Phosphates - 200 Added 1/2 quart of Phosphate remover tonight.
I know the manual says it's best to start with a chlorine level. But I should have some ch in the water.
I circumvented the flow sensor and placed the cell in a 5 gallon bucket of water & in less then a minute had a 15 ppm level in the bucket, so I know the cell is working. I have it set at 100% now and will check it in the AM but I'm stumped.
Thanks for any input.