- Jul 23, 2007
- 401
- Pool Size
- 17500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Ok i have a 16K pool and just got these results back:
.5 FAC
1 TAC
7.8 PH
100 TA
430 Calcium Hardness
60 CYA
I have my chlorine way down because I am running two bottles of scaletec through my pool..it says to get it down below 2ppm so its obvious I have done that. Btw, how well does that stuff work? i have some metal looking stains on my pool and spa floor...its seems to have made the "pitting" in my pool walls less "seeable" though....
Anyway for the 7.8PH, they suggested adding a qt of Muratic acid....This is the first time I have ever had to add acid..
Will that also bring down the TA level? Was that enough? How do I get down the Calcium or do I need to?
Any other suggestions welcome.
.5 FAC
1 TAC
7.8 PH
100 TA
430 Calcium Hardness
60 CYA
I have my chlorine way down because I am running two bottles of scaletec through my pool..it says to get it down below 2ppm so its obvious I have done that. Btw, how well does that stuff work? i have some metal looking stains on my pool and spa floor...its seems to have made the "pitting" in my pool walls less "seeable" though....
Anyway for the 7.8PH, they suggested adding a qt of Muratic acid....This is the first time I have ever had to add acid..
Will that also bring down the TA level? Was that enough? How do I get down the Calcium or do I need to?
Any other suggestions welcome.