Hello All,
I'm not looking to start a flame war or anything. Just looking for opinions, not trying to ruffle feathers.
I currently have a Clean and Clear CC100 installed. I have 2 filters that I swap out when they need to be cleaned. We've had several pool parties and they need to be cleaned/swapped out more often. The swap out is about 15 minutes. Then another 15 to clean the dirty filter.
I have an empty (no sand) Haywood S244S (300 lbs sand, 3.1 Sq Ft) sand filter that came with the house not installed. I'm thinking about installing it and removing the cartridge filter.
Looking at getting opinions.
Currently the Cartridge runs at a clean PSI of 5 (50gpm) and clean it out when it gets to 10PSI (45gpm)
Pump run time is approx 8 hours due to the SWCG needing the time to maintain chlorine level.
What should I do? :?:
I'm not looking to start a flame war or anything. Just looking for opinions, not trying to ruffle feathers.
I currently have a Clean and Clear CC100 installed. I have 2 filters that I swap out when they need to be cleaned. We've had several pool parties and they need to be cleaned/swapped out more often. The swap out is about 15 minutes. Then another 15 to clean the dirty filter.
I have an empty (no sand) Haywood S244S (300 lbs sand, 3.1 Sq Ft) sand filter that came with the house not installed. I'm thinking about installing it and removing the cartridge filter.
Looking at getting opinions.
Currently the Cartridge runs at a clean PSI of 5 (50gpm) and clean it out when it gets to 10PSI (45gpm)
Pump run time is approx 8 hours due to the SWCG needing the time to maintain chlorine level.
What should I do? :?: