Hi All,
I've been working on building a working Frankensquirty from a 360 which I just rebuilt, and a 380 + hose that a friend had for parts. I changed out the feed tube, and that seems to plumb up fine on the 360, but it seems "slow" compared to when I had the 360 feed hose in it.
(Just installed a polaris booster pump, and was running the 360 thru that just fine.)
When I'm trolling thru the parts - it looks like the water management systems are probably different b/c of the different pressures expected in each configuration, (I'm thinking that the jets on the 360 would be bit wider than on the 380, so maybe I need to change out the WMS in the 360, and then it will be identical to the 380?)
Anyone ever done the conversion?
This is what I know is different so far:
1) high pressure wall mount
2) top feed tube
3) WMS (differernt part numbers)9-100-7010 (380) vs 9-100-7014 (360)
4) hoses
Is there anything else that I'm missing?
--Adrian
I've been working on building a working Frankensquirty from a 360 which I just rebuilt, and a 380 + hose that a friend had for parts. I changed out the feed tube, and that seems to plumb up fine on the 360, but it seems "slow" compared to when I had the 360 feed hose in it.
(Just installed a polaris booster pump, and was running the 360 thru that just fine.)
When I'm trolling thru the parts - it looks like the water management systems are probably different b/c of the different pressures expected in each configuration, (I'm thinking that the jets on the 360 would be bit wider than on the 380, so maybe I need to change out the WMS in the 360, and then it will be identical to the 380?)
Anyone ever done the conversion?
This is what I know is different so far:
1) high pressure wall mount
2) top feed tube
3) WMS (differernt part numbers)9-100-7010 (380) vs 9-100-7014 (360)
4) hoses
Is there anything else that I'm missing?
--Adrian