Welcome
Which Taylor test kit did you buy? Do you have the kit number (like K-2005 I am guessing)?
Odds are that it is missing the key test ... the FAS-DPD chlorine test ... which is the key to knowing your FC and CC levels. If your kit did not included it (uses powder, FYI) you can buy that kit separately here:
http://tftestkits.net/FAS-DPD-Chlorine- ... t-p47.html
It is pretty hard to make a big mistake ... they are all correctable ... so take a few deep breaths.
IGNORE EVERYTHING BELOW HERE (as I just realized you have a SWG, so the CYA is probably fine)
Your levels look good with the exception of the CYA ... that is pretty high compared to the recommendation of 30-50ppm for a non-SWG pool. Look at the
Chlorine CYA Chart in Pool School. For a CYA of 90ppm, you should never let your FC below 7ppm. The real problem with the high CYA is if you start to get algae you need to maintain a shock FC level of 35ppm.
I would suggest starting with a 50% water replacement to get the CYA into a good range and then maintaining reasonable FC levels will be easier.
How are you currently adding FC to the pool? IF tablets, you need to realize that they are continually adding CYA and the only way to get rid of it is through water changes.