It's been a while since I ran a complete set of tests. I needed to replenish some reagents and now that I have them here are the results:
(I used FAS-DPD for Cl, Taylor NaCl drop test, and Taylor k-2005 for the other tests)
Water Temp=84°
Ph: 7.6 or 7.8 (I cannot differentiate between the two)
FC=4.8 ppm
CC=0
TC=4.8 ppm
TA=120 ppm
CH=300 ppm
CYA=<20? ppm
NaCl(Salt)=3600 ppm :grrrr:
The CYA reading is very low and the TA is a little high but the salt reading was shocking to me. My Goldline PS8 is reading 3000PPM right now. I was going to bump it up to 3200 but I am glad I didn't. I need to call Goldline and find out why the discrepancy. Unlike the Pool Pilot, the PS8 units cannot be calibrated. Maybe they need to send someone to check it.
Comments and suggestions welcome.
Thanks,
(I used FAS-DPD for Cl, Taylor NaCl drop test, and Taylor k-2005 for the other tests)
Water Temp=84°
Ph: 7.6 or 7.8 (I cannot differentiate between the two)
FC=4.8 ppm
CC=0
TC=4.8 ppm
TA=120 ppm
CH=300 ppm
CYA=<20? ppm
NaCl(Salt)=3600 ppm :grrrr:
The CYA reading is very low and the TA is a little high but the salt reading was shocking to me. My Goldline PS8 is reading 3000PPM right now. I was going to bump it up to 3200 but I am glad I didn't. I need to call Goldline and find out why the discrepancy. Unlike the Pool Pilot, the PS8 units cannot be calibrated. Maybe they need to send someone to check it.
Comments and suggestions welcome.
Thanks,