- May 30, 2012
- 1,619
- Pool Size
- 17000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
New house, new pool. I have an "auto-fill" feature for when level goes down. I just drained 50% of my pool (5K Gallons) to get CYA down. I noticed that once I started refilling, water "poured" into the pool from a side nozzle (as fast as a hose). When I got up this AM I still had 8" to go, but nothing coming out of that opening. Under a cover there is a toilet-like shut-off spewing a small stream of water. Does this sort of "feature" have 2 flow rates? One "full speed" to a certain level, and one to "maintain"?
Question #2: How do you keep Polaris hose from getting tangled? About every other day the "snake" gets caught in a wheel, and everyday the hose gets so tangled it restricts its travel. Is this just one of those daily tasks?
Got 8" of fill to go... hopefully my CYA will be cut in half. I'll check it later today, but I assume if my FC was "right" for my high CYA level (100), my FC level should still be right? What normally gets "off" on a 50% refill?
Question #2: How do you keep Polaris hose from getting tangled? About every other day the "snake" gets caught in a wheel, and everyday the hose gets so tangled it restricts its travel. Is this just one of those daily tasks?
Got 8" of fill to go... hopefully my CYA will be cut in half. I'll check it later today, but I assume if my FC was "right" for my high CYA level (100), my FC level should still be right? What normally gets "off" on a 50% refill?