I have a new variable speed pump (which I love due to drastic improvement in electric bills) and I run it for ten hours at 1500rpm. I also have my SWG on for ten hours and it is set at 20%. I always have high FC (usually 10-15). All other tests are normal and my water is crystal clear. I can get the FC/TC down if I set my SWG to zero for a day or two. But should I care? Here are my numbers using the TF-100:
FC: 13
CC: 00
TC: 13
PH: 7.6
T/A: 110
CH: 200
CYA: 60
TEMP: 88
SAND FILTER PSI: 5
POOL LOAD LOW: usually me and the wifey
Your opinions greatly appreciated![attachment=0:1rdj6mrz]pool2may2012.JPG[/attachment:1rdj6mrz]
FC: 13
CC: 00
TC: 13
PH: 7.6
T/A: 110
CH: 200
CYA: 60
TEMP: 88
SAND FILTER PSI: 5
POOL LOAD LOW: usually me and the wifey
Your opinions greatly appreciated![attachment=0:1rdj6mrz]pool2may2012.JPG[/attachment:1rdj6mrz]