Hello,
We just got (3 weeks) our new 24ft above ground pool (~13500 gallons). Started out at the pool store, with there recommendations. Now, I am getting on the bbb system, and received my tf100 test kit today.
I had the water tested at the pool store this morning, and there readings were:
TC 5
FC 5
CC 0
PH 7.8
TA 125
CH 275
CYA 100
TDS 500
My readings are:
TC 9
FC 9
CC 0
PH 7.8
TA 120
CH 290
CYA 25
For the most part everything looks good I think. My concern is with the cya. Over the 4 readings done at the pool store it started out at 0, then went up to 60, 80, and 100. This is with adding 8lbs of stabilizer, and going through 9, 3" pucks.. Best I can tell from my research, that should put the cya at ~100, but I have done 3 tests, and followed the instructions, as well as the advice here on doing the test. What do you make of this, and which reading would you use? Should I drain water and refill, or add more stabilizer?
Sent from my Nexus S 4G using Tapatalk 2
We just got (3 weeks) our new 24ft above ground pool (~13500 gallons). Started out at the pool store, with there recommendations. Now, I am getting on the bbb system, and received my tf100 test kit today.
I had the water tested at the pool store this morning, and there readings were:
TC 5
FC 5
CC 0
PH 7.8
TA 125
CH 275
CYA 100
TDS 500
My readings are:
TC 9
FC 9
CC 0
PH 7.8
TA 120
CH 290
CYA 25
For the most part everything looks good I think. My concern is with the cya. Over the 4 readings done at the pool store it started out at 0, then went up to 60, 80, and 100. This is with adding 8lbs of stabilizer, and going through 9, 3" pucks.. Best I can tell from my research, that should put the cya at ~100, but I have done 3 tests, and followed the instructions, as well as the advice here on doing the test. What do you make of this, and which reading would you use? Should I drain water and refill, or add more stabilizer?
Sent from my Nexus S 4G using Tapatalk 2