Hey everybody, hopefully I haven't messed things up terribly bad but here's where I'm at.
7000 G Fiberglass SWG pool.
Opened it w/ horribly dark green water, went through 12 1-lb bags of cal-hypo, then some bleach. Then I decided to get a bit more systematic, that brings me to now. I've got my K-2006 and just ran the first tests and ended up with;
FC= 8
CC= 42
PH= 7.0
TA= 70
CH= having the fading endpoint issue, will revisit after shocking.
Shooting a little higher than the recommended shock level of 10, I'm going to 14. PoolCalculator has me adding 87oz of 6%. CYA is truly at 0. Should I take advantage of the absence of CYA and just shock w/ the 87oz? Or do I raise CYA then reevaluate ?
Thanks!
-Jason
7000 G Fiberglass SWG pool.
Opened it w/ horribly dark green water, went through 12 1-lb bags of cal-hypo, then some bleach. Then I decided to get a bit more systematic, that brings me to now. I've got my K-2006 and just ran the first tests and ended up with;
FC= 8
CC= 42
PH= 7.0
TA= 70
CH= having the fading endpoint issue, will revisit after shocking.
Shooting a little higher than the recommended shock level of 10, I'm going to 14. PoolCalculator has me adding 87oz of 6%. CYA is truly at 0. Should I take advantage of the absence of CYA and just shock w/ the 87oz? Or do I raise CYA then reevaluate ?
Thanks!
-Jason