I have just (yesterday) finished filling the pool with water after I replaced the liner about a week ago. I have an 27'x52" AGP with roughly 15,500 gallons of water in it. I have a SWG that I'm going to fit into the system after I stabilize the water to my target settings for a SWG system. My hose TA is extremely high and the pool tested @ 240 ![Shock :shock: :shock:](/images/smilies/icon_eek.gif)
Once I knock that down to my target of 60-80, the plan is to get a timer and wire in the SWG and pump. So, I have a little time to search for the best timer for the money. I have a $200 budget and will be doing the wiring myself. That said, the SWG has a 3 wire line with no plug and has been reconfigured to 110v (came 220v, followed manufacturer's directions to convert to 110). The pool pump currently is running a 3 prong plug (large central ground plug). So obviously I need a 2 circuit timer and would like to avoid cutting my plug end off the pump. Does anyone know a timer that has a 110 receptacle AND wiring block or do I need to bite the bullet and hack up the pump plug?
![Shock :shock: :shock:](/images/smilies/icon_eek.gif)
Once I knock that down to my target of 60-80, the plan is to get a timer and wire in the SWG and pump. So, I have a little time to search for the best timer for the money. I have a $200 budget and will be doing the wiring myself. That said, the SWG has a 3 wire line with no plug and has been reconfigured to 110v (came 220v, followed manufacturer's directions to convert to 110). The pool pump currently is running a 3 prong plug (large central ground plug). So obviously I need a 2 circuit timer and would like to avoid cutting my plug end off the pump. Does anyone know a timer that has a 110 receptacle AND wiring block or do I need to bite the bullet and hack up the pump plug?