- May 26, 2010
- 298
- Pool Size
- 26700
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45
I am replacing my existing Hayward pump with another Hayward Superpump. My old pump was 115v. However, extra wire was run in the conduit to setup 230v circuit. I am trying to decide if I should stay with 115v or get the system wired for 230v. What is the benefit of running the pump at 230v vs 115v. Electric bill?
Thanks,
Rich
Thanks,
Rich