- Jun 5, 2009
- 32
Don't search my old threads to see how long I've meant to do this.
The fitting on the side of our pool...
used to be plumbed for a pressure cleaner. I'm changing it from the below to a 1.5" at pool to 2" to the filter so it can be used for vaccuumw/ a baracuda.
I assembled a 45, a bit of pipe, a 90 and a 2 to 1.5 reducer.
But the reducer wouldn't go over the 1.5 coming out of the side of the pool.
I sanded the i.d. of the reducer probably 50 htousandths of an inch until it would. Now that's not normal, certainly.
Is it possible the pipe out of the pool is ABS or something that won't seal w/ Red-Hot glue to the PVC reducer?
(yes, I only post up w/ odd questions; sorry)
The fitting on the side of our pool...
used to be plumbed for a pressure cleaner. I'm changing it from the below to a 1.5" at pool to 2" to the filter so it can be used for vaccuumw/ a baracuda.
I assembled a 45, a bit of pipe, a 90 and a 2 to 1.5 reducer.
But the reducer wouldn't go over the 1.5 coming out of the side of the pool.
I sanded the i.d. of the reducer probably 50 htousandths of an inch until it would. Now that's not normal, certainly.
Is it possible the pipe out of the pool is ABS or something that won't seal w/ Red-Hot glue to the PVC reducer?
(yes, I only post up w/ odd questions; sorry)