I have a IntelliChlor IC20 SWG on my pool that is reading the salt level at being between 2500-2900ppm. My own test using the AquaCheck test strip is reading 3280ppm. I even took a sample to the pool store to get a 2nd test to verify. The owners manual say's "The cell will continue to produce chlorine but at a reduced level". Any suggestions on what I can do.
Todays test results: FC-1, TA-90, CH-310, PH-7.6, SALT-3280, TEMP. 64 Degrees
Todays test results: FC-1, TA-90, CH-310, PH-7.6, SALT-3280, TEMP. 64 Degrees