Ok, another 1st year newbie with closing questions. Bought a winter cover with the cable and ratchet, and double grommets every 3'. I put a 4' x 4' pillow in the middle, moved the cable up unto the resin part of the vertical supports, cinched it down...and was not at all impressed. The wind gets under the cover, and I'm concerned that the cable will eventually scratch/mar the resin. Today I took off the cable, and hung 29 1 gallon jugs partially filled with water from the grommets with bungees. I like it a lot better this way, but my question is, what about water on the top of the cover? As it gets water on it, will it raise the jugs and fill in the edges, or will it just put pressure on the sides of the pool? If it puts pressure on the sides, can I just raise the jugs up and let the water fill in up to the edges, and then hang the jugs back? Or do I need to pump it occasionally? Any advice would be appreciated. I've included a couple of photos of how it looks now.