My jandy epump was working fine until last week. Now the pda remote says that the epump is <offline>. How do I get the epump back online? Why did the pump go offline?
Thanks for the comment Dave. I hit reset on the main control panel and it looks like the red led light is on next to the filter pump. Interestingly, while the remote dislplays <offline> on the equipement status screen, I can manually change the filter pump toggle to "on"; the pump does not run though.
Resetting did not work. I did not see a power on/off switch, so I powered down by flipping the circuit breaker on the main control panel. Still nothing, no change in status. I cannot tell if there is power going to the pump, although the red led light for the filter pump on the main control panel is lit. Thanks all for the ideas.
Mine ended up being water in the controller corroded everything . Was replaced under warranty . Now have a rain shield made of plastic box over controller head but ventilated enough not to cause overheating.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!