I had to replace the gasket and plates on my E65 hayward pool filter. When I place the assembly back on the gasket is not seating in the groove and when tighted and turn the water on it leaks at various spots.
I took it out, sprayed with WD-40. placed it on 90 degrees off and felt a nice slide when I put it back into position. This reduced the number of leaks but did not stop them.
Is there a special way to tighten the bolts (I used opposites in the same way I do when changing a tire).
HELP. I have tried 5 times to get this gasket back on.
Steve
I took it out, sprayed with WD-40. placed it on 90 degrees off and felt a nice slide when I put it back into position. This reduced the number of leaks but did not stop them.
Is there a special way to tighten the bolts (I used opposites in the same way I do when changing a tire).
HELP. I have tried 5 times to get this gasket back on.
Steve