Hi everyone,
Here is my problem, I have a Pentair TA60 clearpro filter a summit heater (sum3 titanium) and a Pentair superflow pump.
My problem is that after doing a backwash my pressure is around 25 psi.
When it its around 27 psi, my heater stop working telling me not enough FLOW as message.
So now to heat the pool I need to backwash once or twice a day......
Could someone help me, is 25 psi normal pressure or is it to high, another thing I've notice is that if I close my bottom drain and keep only skimmer the pressure goes down to 22 psi.
Thanks.
Here is my problem, I have a Pentair TA60 clearpro filter a summit heater (sum3 titanium) and a Pentair superflow pump.
My problem is that after doing a backwash my pressure is around 25 psi.
When it its around 27 psi, my heater stop working telling me not enough FLOW as message.
So now to heat the pool I need to backwash once or twice a day......
Could someone help me, is 25 psi normal pressure or is it to high, another thing I've notice is that if I close my bottom drain and keep only skimmer the pressure goes down to 22 psi.
Thanks.