We are undecided about which pool to get and it is mainly due to resin top seats. We saw the pool in the store and when we reached over the edge to grab a floatie the edge bent way down and looked like it would break off at the caps. This has me concerned that after a few seasons of extreme hot and cold (Minnesota weather) that they will be brittle and break.
I realize they aren't meant to be leaned on and sat upon but knowing kids it will happen. They also seemed that they will be slippery when wet so if a kid is on it they could slip off.
So will exposed resin hold up in the end? I realize it is probably better for the tracks on the bottom.
Otherwise we are going with the aluminum pool.
Any have extended experience with resin?
I realize they aren't meant to be leaned on and sat upon but knowing kids it will happen. They also seemed that they will be slippery when wet so if a kid is on it they could slip off.
So will exposed resin hold up in the end? I realize it is probably better for the tracks on the bottom.
Otherwise we are going with the aluminum pool.
Any have extended experience with resin?