I just replaced my old aqua rite TC 15 SWG, and it worked for about 3 seconds before it shut off and I got a 'hi salt/amp" reading, followed by a no cell power reading. Took a water sample to pool store and got 1900ppm. Panel board says salt level 2400. Checked configuration menu and is correctly set for TC 15 cell, 65% pool, 15% spa. The old cell was reading only no cell power when i replaced it, as I thought this was the culprit. Have been reading that the Goldline mother panels are not the most reliable. Took cover off panel and all looks kosher. Any thoughts on diagnosing the problem?
30,000 gal IG plaster
goldline SWG
Hayward DE 6020 filter
30,000 gal IG plaster
goldline SWG
Hayward DE 6020 filter