I did the AA treatment as recommended last Friday. My Chlorine levels stayed at 0 and my PH went to 6.6. After the stains (extensive throughout the pool) faded for the most part, I put three bottles of Jack's Magic purple (30,000 gal salt water) and plenty of Polyquat 60. The pool stayed clearthrough Saturday at which time a cleaned the filter and grids completely.
On Sunday morning the water turned milky cloudy (does not look like algae). I slowly started raising the PH by adding Soda Ash. Right now the PH is sitting at 7 and the Chlorine still at .5 (the Pool Pilot is only running at 20%). However the pool water still very cloudy.
Is the cloudiness normal after the AA tratment, adding Jack's magic, Soda Ash and Polyquat?
Should I do something else or be concerned?
Thanks.
On Sunday morning the water turned milky cloudy (does not look like algae). I slowly started raising the PH by adding Soda Ash. Right now the PH is sitting at 7 and the Chlorine still at .5 (the Pool Pilot is only running at 20%). However the pool water still very cloudy.
Is the cloudiness normal after the AA tratment, adding Jack's magic, Soda Ash and Polyquat?
Should I do something else or be concerned?
Thanks.