- May 30, 2011
- 40
ok I went to the pool store today and got my water tested. Here are my results:
fc .5 (they said this was due to my cya being 0) my swg is at 80%. I should probably mention I got the water sample after the generator had only been on 2hrs of the 6 hour cycle
tac .5
ph 7.8
ta 100-110
cya 0
calcium hardness 150
salt 3100
phosphates 100
Here is the steps they told me to take.
add 8lbs of hardness plus.
next add 2 gal of instant conditioner. (i only bought one to start)
monitor chlorine % and results once the cya is up
I got some alkalinity + to raise that a little.
Am I missing anything?
I added the 8lbs of hard+ almost 6hrs ago
how long to I need to wait to add the conditioner and alk + and should I do one before the other
Sorry for the 60 questions
fc .5 (they said this was due to my cya being 0) my swg is at 80%. I should probably mention I got the water sample after the generator had only been on 2hrs of the 6 hour cycle
tac .5
ph 7.8
ta 100-110
cya 0
calcium hardness 150
salt 3100
phosphates 100
Here is the steps they told me to take.
add 8lbs of hardness plus.
next add 2 gal of instant conditioner. (i only bought one to start)
monitor chlorine % and results once the cya is up
I got some alkalinity + to raise that a little.
Am I missing anything?
I added the 8lbs of hard+ almost 6hrs ago
how long to I need to wait to add the conditioner and alk + and should I do one before the other
Sorry for the 60 questions