So, I’m helping a friend of mine build a pool at his house. The pool will be about 20,000 gallons, gunite, saltwater, with three fountains/statues/waterfalls ect. The depth will be only 4 ½ feet. We have a basic idea of how the plumbing and lights should be. However, we are looking for some creative minds to come up with an elaborate light/deck jet/water jet/plumbing system. It would be nice to use just one Intelliflo pump but if more are required it would not be a problem.
The pad shown in the picture is for the equipment. It will be at least 3 feet higher than the waterline. All the equipment will be fully automated.
The massive 14 foot tall wall of statues will be between the pool and the equipment. There will also be a waterfall on each side of the center fountain/statue in the dark stone area.
Our basic light idea is two color changing LEDs on the two angled portions of the stairs. This should illuminate the entire pool.
It would be nice to have just two skimmers with one on each far end.
As far as the rest of the plumbing/lighting esthetics, we are welcoming the imagination of others.
Any ideas?
The pad shown in the picture is for the equipment. It will be at least 3 feet higher than the waterline. All the equipment will be fully automated.
The massive 14 foot tall wall of statues will be between the pool and the equipment. There will also be a waterfall on each side of the center fountain/statue in the dark stone area.
Our basic light idea is two color changing LEDs on the two angled portions of the stairs. This should illuminate the entire pool.
It would be nice to have just two skimmers with one on each far end.
As far as the rest of the plumbing/lighting esthetics, we are welcoming the imagination of others.
Any ideas?