- Oct 6, 2009
- 175
- Pool Size
- 22500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Core-55
Having watched the pool service company close my pool last winter for the first time, I decided I would attempt to open the pool on my own. But I have one issue in that they removed the wires from my pump and completely removed the pump. So I'm faced with the dilemma of which wire to connect where!!
The pump is a Jandy PlusHP Series, model PHPM2.0. I have 3 wires to connect - Green, Red and Black. I'm pretty confident about the green wire being the ground and it connecting to a screw on the outside of the motor housing. But for the Red and Black wires, there are 2 copper connectors inside the housing marked L1 and L2. Would anyone happen to know which wire goes to which connector???
And if I happen to get this wrong, would it simply not function or could I do some serious damage?
I have the manual that came with the pump, but every time it gets to the point of talking about connecting wires, it says to use a qualified electrician to install it. I sure would hate to call the pool company to charge me a service call just to come and show me which wire to plug where!!
Thoughts??
The pump is a Jandy PlusHP Series, model PHPM2.0. I have 3 wires to connect - Green, Red and Black. I'm pretty confident about the green wire being the ground and it connecting to a screw on the outside of the motor housing. But for the Red and Black wires, there are 2 copper connectors inside the housing marked L1 and L2. Would anyone happen to know which wire goes to which connector???
And if I happen to get this wrong, would it simply not function or could I do some serious damage?
I have the manual that came with the pump, but every time it gets to the point of talking about connecting wires, it says to use a qualified electrician to install it. I sure would hate to call the pool company to charge me a service call just to come and show me which wire to plug where!!
Thoughts??