I have a 12 x 24 Intex AG pool that I got last summer. I assembled the pool and filter and everything worked perfectly last year. I left the pool up over the winter, but I brought in the pump/filter and SWG. When I opened the pool last weekend, the water was clear with the exception of a small bit of debris that had gotten under the tarp. I hooked up the pump/filter (Model 633T) and SWG (Model CS8110).
Things appear to work well when you first turn on the pump, the water pumps well and the output is good. After a while, the output just becomes nonexistent. I don't know how long it takes for the flow to become non existent. I have cleaned the filter cartridge repeatedly, checked the hoses and everything else I could think of and it still happens. Of course when the water flow decreases, I get the low flow warning on the SWG. I don't think the SWG has anything to do with the problem and hopefully the pump isn't bad as it has only been used for about 3 months last year before it was stored indoors.
Does anyone have any ideas what could be causing the flow issues?
Things appear to work well when you first turn on the pump, the water pumps well and the output is good. After a while, the output just becomes nonexistent. I don't know how long it takes for the flow to become non existent. I have cleaned the filter cartridge repeatedly, checked the hoses and everything else I could think of and it still happens. Of course when the water flow decreases, I get the low flow warning on the SWG. I don't think the SWG has anything to do with the problem and hopefully the pump isn't bad as it has only been used for about 3 months last year before it was stored indoors.
Does anyone have any ideas what could be causing the flow issues?