Today the PoolPilot Salt Sensor reading is reading 000.
Otherwise no error messages are being shown, pH sensor is reading correctly as is temperature reading.
It will not produce any chlorine (SC-60 cell), tested for this at incoming spout despite setting at 36%, voltage shows fine (I think) at 6.5 but no amps showing.
Have new spare cell would not work either, also have new spare Tri-sensor, and cable, did not help. Old Tri-sensor is in very good shape but cleaned it anyway. Flushed spring valve and backwashed filter to no avail.
Looks like a board is out but which board, could it be the power cable to the salt cell, or something else? Unit is a little over 3 years old.
Feeding chlorine manually, lucky I caught it before I went out.
Any help would be appreciated.
Otherwise no error messages are being shown, pH sensor is reading correctly as is temperature reading.
It will not produce any chlorine (SC-60 cell), tested for this at incoming spout despite setting at 36%, voltage shows fine (I think) at 6.5 but no amps showing.
Have new spare cell would not work either, also have new spare Tri-sensor, and cable, did not help. Old Tri-sensor is in very good shape but cleaned it anyway. Flushed spring valve and backwashed filter to no avail.
Looks like a board is out but which board, could it be the power cable to the salt cell, or something else? Unit is a little over 3 years old.
Feeding chlorine manually, lucky I caught it before I went out.
Any help would be appreciated.