If this is not the right forum for this question, please let me know which one is.
According to the manufacture the pump should start pumping water out at 2-3" and stop when the water level is 0.5-1.5"
My pump turns on only if the water level is slightly above 4". I tested it with the bucket of water.
I took the sensor cover off, but don't know where to go from here. Is there a way to fix this sensor? I see the whole switch assembly can be purchased for around $60, but I wonder if I can get the diaphragm only.
This is the manual for my pump. I'll try to contact manufacture and do some googling, but if anyone can provide any input - please do.
http://www.pumpagents.com/pdf/LittleGia ... ASP-LL.pdf
Thanks.
According to the manufacture the pump should start pumping water out at 2-3" and stop when the water level is 0.5-1.5"
My pump turns on only if the water level is slightly above 4". I tested it with the bucket of water.
I took the sensor cover off, but don't know where to go from here. Is there a way to fix this sensor? I see the whole switch assembly can be purchased for around $60, but I wonder if I can get the diaphragm only.
This is the manual for my pump. I'll try to contact manufacture and do some googling, but if anyone can provide any input - please do.
http://www.pumpagents.com/pdf/LittleGia ... ASP-LL.pdf
Thanks.